News Center

Your current location:Home - About us - News center

single mode fiber multimode fiber connector in medical imaging equipment Application

Time:2021-03-13 19:56:24 Hits: 5013

single mode fiber multimode fiber connector in medical imaging equipment Application

The main function of optical fiber connector is to quickly connect two optical fibers, so that the optical signal can be continuous and form an optical path. Optical fiber connector is a kind of movable and reusable passive device, which is indispensable and used most in optical communication system. Through the optical fiber connector, the two end faces of the optical fiber can be precisely connected, so that the optical energy output from the transmitting optical fiber can be coupled to the receiving optical fiber to the maximum extent, and the influence of the system caused by its intervention needs to be minimized. Because the outer diameter of the optical fiber is only 125 um, and the light passing part is smaller, the single-mode optical fiber is only about 9 um, and the multi-mode optical fiber is 50 um and 62.5 um, so the connection between the optical fibers needs accurate alignment.

Link: Hybrid connector E-bike power battery pack energy storageM12-connectorsconnectors-cableM12 connectorM8 connectorM5 connectorsconnectors-cable.com