News CenterYour current location：Home - About us - News center
1. A cooling fan is installed at one end of the lithium battery module, and a ventilation hole is left at the other end to accelerate the air flow between the gaps of the cell and take away the high heat generated when the cell is working;
2. Tc100x series thermal conductive silica gel gasket is added at the top and bottom of the electrode end, so that the heat that is not easy to dissipate at the top and bottom is transmitted to the shell through the thermal conductive silica film for heat dissipation. At the same time, the high electrical insulation and puncture resistance of tc100x series thermal conductive silica gel gasket have a good protection effect on the lithium battery pack.
3. Through the control of the cooling system. The branch of cooling parts is mainly to improve the structure of lithium battery fins, cooling plates, heat transfer plates and other parts.
As an indispensable part of lithium battery energy storage, high current connector has great influence on the whole lithium battery energy storage system. Therefore, in order to improve the quality of products, we must pay attention to the safety design of thermal management system. With the rapid development of lithium battery energy storage, the connector industry is becoming safer, more reliable and more environmentally friendly!